P13 Drive in stud 50/Box
Price per BX:
$44.54 for 1+
In stock
P13, Drive in plug for reinforcement Drive in stud made out of steel with hardened body (diametre 7,4/6,8mm and hight 9 mm) and welded tungsten carbide insert.
P13, Drive in plug for reinforcement Drive in stud made out of steel with hardened body (diametre 7,4/6,8mm and hight 9 mm) and welded tungsten carbide insert. This stud is easy to apply. Drill a hole in the shoe with a 6,7 mm drill bit. Place the stud on top of the hole and drive it down with a softened hammer. The stud can be driven down in line with the shoe or or to a suitable hight depending on the need of traction. The stud can be reused by tapping it loose and applying it again as previously described. This stud is suitable for protection when the shoe wear is excessive or when light traction is prefered. Normally two studs are placed in the toe and one in each heel.
©2018 Spanish Lake Blacksmith Shop